Blower Heat Reactivated Air Dryer

BHR Blower heat regenerated dryer

This Air dryer is similar to the Internal Heater type air dryer except that no process air is wasted. For regeneration of the Desicant bed , a blower provides the atmospheric air which is pre-heated in an external heater upto 160 deg C, to regenerate the desiccant bed.

Therefore no process air is used for regeneration. The unit is fully automatic / semi-automatic .

The desiccant used is normally Silica gel or Activated alumina.

MODEL NO. CAPACITY PIPE LINE SIZE
mm
POWER CONSUMPTION KWH / DAY/ APROX. OVERRALL DIMENSIONS
M3/ HR CFM LENGHT
mm
WIDTH
mm
HEIGHT
mm
BHR-01 163.0 100 25 60.00 1600 1400 1800
BHR-02 244.5 150 25 72.45 1800 1500 2000
BHR-03 326.0 200 40 101.70 1800 1500 2000
BHR-04 489.0 300 40 144.90 2000 1500 2200
BHR-05 652.0 400 50 195.76 2000 1500 2200
BHR-06 815.0 500 50 246.60 2000 1500 2200
BHR-07 978.0 600 50 289.75 2000 1800 2400
BHR-08 1222.0 750 65 369.91 2200 1800 2400
BHR-09 1630.0 1000 65 508.52 2400 1800 2600
BHR-10 2037.0 1250 80 594.92 2500 2000 2800
BHR-11 2445.0 1500 80 724.52 2500 2000 3000
BHR-12 3260.0 2000 100 949.53 3000 2000 3000
BHR-13 4075.0 2500 100 1210.08 3000 2000 3000

The above capacities are rated at an inlet temp. of 40°C., 7kg/ Cm2 Pr. ( 0.7 Mpa ) and at an outlet dew point of (-) 40°C. at Atm. Pressure, Supply Voltage of 220 V-1 PH- 50 HZ or 415V-3PH-50 Hz.

Above data is only for estimation and can be changed without notice. For special systems and higher capacities contact us.

For cost comparison of operating of a Heat of Compression Type Air Dryers Vs. Heated Type/Heatless/Refrigerated Type Air Dryers please Click Here.

contact for dryers

Email : Dryer@mellcon.com, costing@mellcon.com

phone : +91 9313227567